Tubs may taper
Tubs may taper or flex.
Plastic tub labelling machines for lids, sides and bases
Practical specification guidance for plastic tubs, food tubs, cosmetic tubs and retail containers. Use this page to identify the likely machine route, what can affect label accuracy and what details Lancing UK needs before recommending equipment.
Likely machine route
For plastic tubs, food tubs, cosmetic tubs and retail containers, the usual starting point is side, top or top-and-bottom labelling depending on label position. A machine should not be selected from the product name alone: the correct route depends on the container geometry, label size, label material, application position, required speed and how often operators change between formats.
Where the pack is cylindrical, wrap control and roller pressure are normally important. Where the pack is flat, oval or rectangular, product stabilisation and front/back alignment become more important. If the label carries variable data, barcode or batch information, the project may also need coding, printing or print-and-apply integration.
What to specify before quotation
The fastest way to get a useful recommendation is to send accurate product and label information. The main details for this application are:
- tub diameter or width/depth
- tub height and taper
- label positions and sizes
- output and product spacing
- whether top, side or base labels are needed
Short videos of the current packing method are also useful because they show product presentation, manual handling problems and the line stage that is limiting output.
Common issues to avoid
Most labelling problems start with assumptions made before the machine is built or supplied. For this application, check the following before comparing quotations:
Side labels need
Side labels need careful guide control.
Lid and base
Lid and base labels may require separate application stations.
How Lancing UK can help
Lancing UK can help shortlist semi-automatic, compact automatic and fully automatic labelling machinery based on the pack and line requirement. The recommendation can also include conveyors, product handling, coding, inspection, commissioning and aftercare where those details affect reliable running.
Quotation tip: send pack dimensions, label dimensions, label roll details, output target, photos and any existing line-layout information.
Buyer questions
Questions about plastic tub labelling machine uk
Which labelling machine is suitable for plastic tubs, food tubs, cosmetic tubs and retail containers?
The usual starting point is side, top or top-and-bottom labelling depending on label position. The final choice depends on pack dimensions, label position, output target and how the product is presented to the machine.
What information should be sent for a quotation?
Send pack photos, dimensions, label roll details, label position, output target, line layout and any changeover or coding requirements.
Can this be supplied as part of a wider packaging line?
Yes. The labelling stage can be considered with conveyors, product handling, coding, inspection and upstream filling or capping equipment where required.
Need help specifying this labelling application?
Send product photos, label roll details and the target output. Lancing UK can point you towards the most suitable labelling route.